L-RX201
Wavetrend Reader

Download PDF

Description:

The RX201 RFID RS485 / RS232 Readers detect and decode RF transmitted signals from the Wavetrend family of tags. The reader incorporates a BNC connector to allow for attachment of an external antenna to extend the reader's range. The RX201 type readers can be used singly, or networked together to form a reader network. The reader connects to a PC or intelligent hardware controller via RS232, RS485 or TTL.

L-RX300
Serial Port Reader

Download PDF

Description:

The RFID PC Access Reader connects directly to an available serial port on the computer. The Reader detects the presence of all Wavetrend compatible Active Tags within its read range and continuously streams the data to the serial port.
The reader is of a crystal stabilised Superheterodyne RF receiver design.

Features:

Plugs into any Serial port with a DB9 (male) connector
No external power supply is needed as this is supplied by the PC’s communication port.
The Baud rate of outgoing data is 57’600Bps
The Received Signal Strength indicator is appended to the Tag information which is passed onto the serial port.
Small compact design
The antennae is enclosed within the product housing

Applications:

PC access control (PCAC) applications when used in conjunction with Wavetrend PCAC software (product code: L-SY100)

L-RX400
USB Port Reader

Download PDF

Description:

The Reader interface to the personal computer via a standard USB cable (incorporated into the reader). One of the features of this reader is that it operates on a plug and play basis due to the USB standard it complies to.
The reader works in conjunction with the Wavetrend Active RF ID Tags. The enclosure was designed in such a way that it enhances the esthetical value of that individual’s desk.
The user is able to select only one tag via software and monitor that specific tag, or monitor a few tags which was selected by the user at installation.

Features:

The reader gain can be adjusted from high to low gain mode dynamically via software
The reader is completely plug and play.
The reader complies with all the USB 1.1 standards. Meaning it can interface to any USB hub etc.
In stand-alone mode the RSSI setting can be set dynamically via software. Which controls the read-range of the reader.
The user receives a working DLL to interface to the reader. This then simplifies interfacing on software level to hardware, which makes the reader very transparent.

Applications:

1. PCAC
The reader can be used for the Link-it PCAC system.
2. STAND ALONE READER
The reader may be used as a general reader were there is but only a personal computer with USB port and no RS-485 network nearby.

L-RX900
Ethernet Reader

Download PDF

Description:

The L-RX900 RFID Ethernet Reader detects and decodes RF transmitted signals from the Wavetrend family of tags.
Interpreted data is converted into electrical information that is passed through the Ethernet port. L-RX900 Readers can be used in a stand-alone mode or can be connected by using a network hub. The electrical connection between the host PC and the ethernet reader is by IEEE 802.3 protocol standard.

L-RX1000
Wireless Reader

Download PDF

Description:

The L-RX1000 RFID Wireless Reader detects and decodes RF transmitted signals from the Wavetrend family of tags.
Interpreted data is converted into electrical information that is passed through the Wifi port.
The L-RX1000 readers can be used in a one-one Ad-Hoc mode or connected via a wireless router / hub on a wireless network. The communication between the host PC and the wireless reader is by IEEE 802.11b protocol standard.